Filter
Top Products
Operating the Main Menu (Cont.)
Adjusting Picture Quality (Cont.)
Remote control unit
MENU/ENTER
button
Cursor buttons
PAGE BACK button
Submenu items
[PICTURE
menu]
The selected item is shown in magenta color. Items shown
in gray color cannot be operated or set in the current mode.
Adjustment items (on the PICTURE menu) are different when
AV signals are input and when computer-related signals are
input.
Make adjustment with the cursor
button
or
.
For video system input
To adjust multiple items, repeat steps 4 and 5.
To reset all items (to factory-set adjustment values “0”), select
ALL RESET with the cursor buttons and press the MENU/
ENTER button.
To reset only the selected items (ALL RESET excluded) to
the factory-set adjustment value, press the remote control’s
PRESET button. The selected item is reset to the factory-set
adjustment value.
Adjustment item Button
Adjustment content
Gets darker.
(-30 0 +30)
Gets brighter.
(-30 0 +30)
Gets lower.
(-30 0 +30)
Gets higher.
(-30 0 +30)
Gets softer.
(0 7)
Gets sharper.
(0 7)
Gets softer.
(-30 0 +30)
Gets deeper.
(-30 0 +30)
Gets reddish.
(-30 0 +30)
Gets greenish.
(-30 0 +30)
Resets all adjustment values of
items on the PICTURE menu to
the factory-set values (0).
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
TINT
ALL RESET
MENU/
ENTER
The adjustment item, TINT, is displayed only for NTSC system. It is not
displayed (cannot be adjusted) when PAL or SECAM system signals are
input.
When video signals are input to the COMPUTER IN-2 terminal, adjustment
items “COLOR” and “TINT” are indicated but cannot be adjusted.
For computer system input
To adjust multiple items, repeat steps 4 and 5.
To reset all items (to factory-set adjustment values “0”), select
ALL RESET with the cursor buttons and press the MENU/ENTER
button.
To reset only the selected items (ALL RESET excluded) to the
factory-set adjustment value, press the remote control’s PRESET
button. The selected item is reset to the factory-set adjustment
value.
(To be continued on the next page)
42