Filter
Top Products
Connecting to Various Devices (Cont.)
Connecting the Power Cord (Supplied)
After all devices have finished being connected, connect the projector’s power cord. At this time, do not turn on the MAIN
POWER switch yet.
Insert the supplied power cord
into the power input terminal (AC
IN ~) of the projector.
AC IN ~
Power cord (supplied)
Insert the plug of the supplied
power cord into a wall outlet.
To prevent fire and electric shock, observe the following:
When you do not use devices, pull out their power cords
from wall outlets.
Do not connect the devices with power cords other than
supplied.
Do not use voltage other than the power voltage indicated.
Do not scar, damage, or walk on the power cords. Also, do
not put a heavy object on, heat or pull the power cords,
otherwise they may be damaged.
Do not insert or pull out the plugs with a wet hand.
Since the power requirement of the projector is high, be sure
to insert the power plug directly into a wall outlet.
To use the projector
Remove the lens cap.
* The lens cap has a string attached and it is fixed to the
projector.
Be sure to place the cap on the lens when the projector
will not be used for some time.
Lens cap
26