Filter
Top Products
Operating the Main Menu (Cont.)
Changing (Setting) the Source
Remote control unit
MENU/ENTER
button
Normally, use the source setting in AUTO. If use in AUTO is unstable
such as color not appearing, the screen image is disturbed or
intermitted, then set to the dedicated source (forced mode) in
accordance with the input signal.
When shipped from the factory, the source settings are as follows:
Input mode
Factory setting
Input mode
Factory setting
VIDEO
NTSC COMPUTER 1 AUTO
Y/C
NTSC
COMPUTER 2
AUTO
Y, P
B
/B-Y, P
R
/R-Y AUTO
Cursor buttons
Depending on the signal from a device connected, adjustment may be needed
after a dedicated source is set. If that is the case, adjust the appropriate
items.
When the input mode (SOURCE) is VIDEO or Y/C, and if AUTO is set, the
automatic detecting function may work, possibly causing the screen to be
intermitted or disturbed. In that case, set to a dedicated source (forced mode).
When special effect playback (fast-forward/ twice-speed/triple-speed) is
performed on a video deck, etc, the picture may be disturbed or intermitted,
depending on the device.
PAGE BACK button
Main menu
Submenu item [SOURCE]
The selected item is shown in magenta color. Items shown
in gray color cannot be operated or set in the current mode.
Items that can be set are different when video signals are
input and when computer signals are input.
For dedicated source signals (corresponding frequency, etc.)
for computer signals, see page 21.
Press the MENU/ENTER button.
The main menu appears on the screen.
Select a submenu item “SOURCE”
using the cursor button
or .
The SOURCE item (shown in text) is indicated in magenta color.
Press the MENU/ENTER button.
The submenu items, SOURCE menu, appears on the screen.
The display in ( ) shows
the currently set status.
(SOURCE menu)
Select the item to set using the cursor
buttons or .
The item to set is shown in magenta color.
(To be continued on the next page)
48