Filter
Top Products
Basic Operations
Projector’s buttons
STAND BY
indicator
OPERATE indicator
OPERATE button
Remote control unit
The following describes the basic procedure for normal use of
the projector.
1. Turning on the Power
Turn on the MAIN POWER switch.
ON
:
The main power turns on and the STAND BY
indicator comes on.
Projector’s indicator
MAIN POWER switch
Press the OPERATE button.
(Or press the remote control’s
OPERATE button for one second
or more.)
The OPERATE indicator comes on.
About 30 seconds after the MAIN POWER switch is
turned on, you can start projecting.
Projector
Remote control unit
OPERATE
or
(ON)
After the power is turned on, the screen may be jumbled for a few
seconds. but this is not a malfunction.
OPERATE button
Turning off the Power
Press the OPERATE button.
(Or press the remote control’s
OPERATE button for one second
or more.)
The STAND BY indicator changes to blinking, and the
projector goes into cool-down mode.
Example of the projector’s button
(ON)
Projector
(Blinking)
STAND BY
Turn off the MAIN POWER switch
after the STAND BY indicator
changes to steady on.
OFF
: The MAIN POWER switch turns off and the
STAND BY indicator goes off.
Projector
(OFF)
STAND BY
* Do not turn off the MAIN POWER switch during cool
down mode (the STAND BY indicator blinking). Turn it
off after the STAND BY indicator becomes on (stand-
by mode).
28
(ON)
STAND BY