Filter
Top Products
Controls and Features (cont.)
Connector Panel
Y/C (S video) input terminal (Mini DIN 4 pin)
Connect this terminal to the S video output terminal of a
video deck, etc.
VIDEO (composite video) input terminal (BNC)
Connect this terminal to the composite video output terminal
of a video deck, etc.
AUDIO OUT (audio output) terminal (stereo mini jack)
Of input signals inputted to the projector, the audio signal
of the device being projected is output. Volume should be
adjusted using the VOL. (+/-) buttons on the remote control
or VOLUME on the setting menu. When a cable is
connected to this jack, no audio sound is produced from
the projector’s speakers.
Y, P
B
/B-Y, P
R
/R-Y input terminals (BNC)
These are input terminals for component (Y, B-Y, R-Y)
signals and Hi-Vision base band (Y,
P
B
,
P
R
) signals. Devices
with component signal output terminals for NTSC or Hi-
Vision can be connected.
AUDIO L/R (Audio left/right) input terminals (pin jacks)
Of devices connected to the video input terminals, such
as a video deck, etc., the audio output terminals of the
device to de projected is connected to these terminals.
The input audio signal is reproduced by the speakers of
the projector. The signal is also output from the AUDIO
OUT terminal of the projector.
RS-232C connector (D-sub 9 pin)
This is a RS-232C interface-specified connector. This
projector can be controlled by a computer connected
externally.
* For details, consult your dealer.
COMPUTER OUT (computer output) connector (D-sub
3-row 15 pin)
* When the input signal is stereo signal, connection should
The computer input signal projected on the screen is output.
be made to both L and R.
A display unit can be used by connecting it to this connector.
* Signals from a monaural device should be connected to
only L. That way, the projector’s speakers and the AUDIO
OUT terminal produce the same sound from both Land R.
REMOTE terminal (mini jack)
Connect an infrared remote control extension unit, etc. to
this jack.
* For details, consult your dealer.
To select the proper audio input for video input:
The video input terminals (AV IN input terminals) can be switched
with the projector’s or remote control’s VIDEO button. However, since
this projector has only a single audio input terminal, reconnect audio
input in accordance with the AV device to be used.
13