Panasonic PT-D995U Projector User Manual


 
Operating the Main Menu (Cont.)
Changing the Color System
Remote control unit
AUTO is set for the color system when the projector is shipped from
the factory. Normally, use it in AUTO. If operation in AUTO is unstable
such as with color not being shown, set to a dedicated color system
MENU/ENTER
button
in accordance with the color system of the signal being input.
Press the MENU/ENTER button.
The main menu is shown on the screen.
Select “DECODER” with the cursor
button
or
The selected item (displayed in text) is shown in magenta color
on the screen.
Cursor buttons
Set the color system with the cursor
button
or
Each time you press the cursor button
or
, the color system
changes as follows.
: Forward /
: Backward
AUTO
Normally, set to AUTO. The color
system of a signal being input is
automatically identified.
PAGE BACK button
NTSC
Dedicated to NTSC.
Main menu
NTSC4.43
Dedicated to NTSC4.43.
PAL
Dedicated to PAL.
SECAM
Dedicated to SECAM.
Color system (DECODER) display
About automatic signal identification
AUTO is selected when shipped from the factory. In AUTO, the color system
(DECODER) of the signal being input is automatically identified and indicated
in ( ). Refer to the main menu display.
When computer-related signal is input, the display of the
color system is changed to gray color, making operation
If operation in AUTO is unstable such as with color not being shown, set to a
dedicated color system in accordance with the color system of the signal
being input. When the dedicated color system is set, be careful as automatic
identification does not work.
impossible. When video signals from AV devices are input,
the item for the color system can be set.
To finish the main menu, press the PAGE BACK
button.
37