Filter
Top Products
[DISPLAY OPTION] menu
ENGLISH - 63
Settings
■
[INPUT GUIDE]
Set display of the input terminal name currently
selected in the position set by the [OSD
POSITION].
z
The setting will change as follows each time
you press the button.
[ON] [OFF]
■
[WARNING MESSAGE]
You can set the display/hide of the warning
message.
z
The setting will change as follows each time
you press the button.
[ON] [OFF]
[BACK COLOR]
Set the color of the projected image when there is no
signal input.
1) Press
to select [BACK COLOR].
2) Press
to switch [BACK COLOR].
z
The setting will change as follows each time
you press the button.
[BLUE] [BLACK]
[DEFAULT
LOGO]
[USER LOGO]
[BLUE]
The entire projection area appears
blue.
[BLACK]
The entire projection area appears
black.
[USER LOGO]
The picture registered by the user
is projected.
[DEFAULT
LOGO]
The Panasonic logo is projected.
Note
z
To create the image for [USER LOGO], “Logo
Transfer Software” included in the supplied CD-
ROM is required.
[STARTUP LOGO]
Set the logo display when the power is turned on.
1) Press
to select [STARTUP LOGO].
2) Press
to switch [STARTUP LOGO].
z
The setting will change as follows each time
you press the button.
[DEFAULT LOGO] [USER LOGO]
[NONE]
[DEFAULT
LOGO]
The Panasonic logo is projected.
[USER LOGO]
The picture registered by the user
is projected.
[NONE] No startup logo is projected.
Note
z
The startup logo will disappear in approximately 15
seconds.
z
To create the image for [USER LOGO], "Logo
Transfer Software” included in the supplied CD-
ROM is required.