Filter
Top Products
[SECURITY] menu
80 - ENGLISH
Settings
[TEXT CHANGE]
Change the text displayed when the text display is
enabled by selecting [TEXT] in [DISPLAY SETTING].
1) Press
to select [TEXT CHANGE].
2) Press the <ENTER> button.
z
The [TEXT CHANGE] screen is displayed.
3) Press
to select the text, and
press the <ENTER> button to enter the
text.
z
Maximum 22 characters can be input.
4) Press
to select [OK] and
press the <ENTER> button.
z
The text is changed.
[MENU LOCK]
Display the menu with the <MENU> button, and set
whether to enable menu operations.
1) Press
to select [MENU LOCK].
2) Press
to switch [MENU LOCK].
z
The setting will change as follows each time
you press the button.
[OFF] [ON]
[OFF]
Cancels the lock on menu
operations.
[ON] Locks menu operations.
Note
z
After setting [MENU LOCK] to [ON], if the wrong
password is input, the <MENU> button cannot be
operated.
z
At the time of purchase or after [ALL USER DATA]
initialization, [MENU LOCK] is set to [OFF].
z
The lock release is maintained until the projector
enters standby.
[MENU LOCK PASSWORD]
Change the menu lock password.
1) Press
to select [MENU LOCK
PASSWORD].
2) Press the <ENTER> button.
z
The [MENU LOCK PASSWORD] screen is
displayed.
3) Press
to select the text, and
press the <ENTER> button to enter the
text.
z
Maximum 16 characters can be input.
4) Press
to select [OK], and
press the <ENTER> button.
z
To cancel, select [CANCEL].
Attention
z
The initial password when used for the rst time or
after initializing all the user data is “AAAA”.
z
Change the password periodically that is hard to
guess.
[CONTROL DEVICE SETUP]
Enable/disable the button operations on the control
panel and the remote control.
1) Press
to select [CONTROL
DEVICE SETUP].
2) Press the <ENTER> button.
z
The [CONTROL DEVICE SETUP] screen is
displayed.
3) Press
to select [CONTROL
PANEL] or [REMOTE CONTROL].
4) Press the <ENTER> button.
z
The [CONTROL PANEL] screen or the
[REMOTE CONTROL] screen is displayed.
■
[CONTROL PANEL]
z
You can set the limitation on the control from
the control panel.
[ENABLE]
Enables all button operations from
the projector body.
[DISABLE]
Disables all button operations from
the projector body.