Filter
Top Products
[NETWORK] menu
ENGLISH - 91
Settings
■
[Network cong] page
Click [Detailed set up] → [Network cong].
z
Click [Network cong] to display the [CAUTION!] screen.
z
The current settings are displayed by pressing the [Next] button.
z
The following setting change screen is displayed by pressing the [Change] button.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(1) [PROJECTOR NAME]
Enter the name of the projector. Also enter the host
name if it is required when using a DHCP server, etc.
(2) [DHCP ON]/[DHCP OFF]
To enable the DHCP client function, set to [DHCP
ON].
(3) [IP ADDRESS]
Enter the IP address when not using a DHCP server.
(4) [SUBNET MASK]
Enter the subnet mask when not using a DHCP
server.
(5) [DEFAULT GATEWAY]
Enter the default gateway address when not using a
DHCP server.
(6) [DNS1]
Enter the DNS1 server address.
Permissible characters for the entry of DNS1 server
address (primary):
Numbers (0 to 9), period (.)
(Example: 192.168.0.253)
(7) [DNS2]
Enter the DNS2 server address.
Permissible characters for the entry of DNS2 server
address (secondary):
Numbers (0 to 9), period (.)
(Example: 192.168.0.254)
(8) [Back]/[Next]
Click the [Back] button to return to the original
screen. The current settings are displayed by
pressing the [Next] button. Click the [Submit] button
to update the settings.
Note
z
When you use the “Forward” and “Back” functions of your browser, a warning message “Page has Expired”
may appear. In that case, click [Network cong] again since the following operation will not be guaranteed.