Filter
Top Products
[SIGNAL LIST] menu
78 - ENGLISH
Settings
Managing the sub memory
list
The projector has a sub memory function that can
register the multiple image adjustment data, even if it
is recognized as the same signal by the frequency or
format of the synchronization signal source.
Use this function when you need to adjust the picture
quality such as switching of the aspect ratio or white
balance by the same synchronization signal source.
The sub memory includes all the data that can be
adjusted for each signal, such as the screen aspect
ratio and data adjusted in the [PICTURE] item
([CONTRAST], [BRIGHTNESS], etc.).
■
To register the current settings to
the list
1) Press
on the normal screen (when
the menu is not displayed).
z
The sub memory registration screen is
displayed if the sub memory is not registered.
Proceed to Step 3).
z
A list of sub memories registered to the signal
currently input is displayed.
z
When [SUB MEMORY] is selected with
[PROJECTOR SETUP] → [FUNCTION
BUTTON] on the menu, the <FUNCTION>
button can be used instead of
.
2) Press
to select the sub
memory number to register in [SUB
MEMORY LIST].
3) Press the <ENTER> button.
z
The [RENAME] screen is displayed.
4) Press
to select [OK] and
press the <ENTER> button.
z
To rename the registered data, follow the
procedure in Steps 6) and 7) in “Renaming the
registered data” (
page 76).
■
To switch to the sub memory list
1) Press
on the normal screen (when
the menu is not displayed).
z
A list of sub memories registered to the signal
currently input is displayed.
2) Press
to select the signal to
switch in [SUB MEMORY LIST].
3) Press the <ENTER> button.
z
This switches to the signal selected in Step 2).
■
To delete the sub memory data
1) Press
on the normal screen (when
the menu is not displayed).
z
The [SUB MEMORY LIST] screen is displayed.
2) Press
to select the item to
delete, and press the <DEFAULT>
button.
z
The [ENTRY SIGNAL DELETE] screen is
displayed.
z
To cancel the deletion, press the <MENU>
button to return to the [SUB MEMORY LIST]
screen.
3) Press the <ENTER> button.
z
The selected sub memory will be deleted.