Panasonic PT-RZ370U Projector User Manual


 
Chapter 4 Settings — [PICTURE] menu
48 - ENGLISH
Note
f
When [COLOR MATCHING] (
x
page 59) adjustment is set to other than [OFF], [COLOR TEMPERATURE] is xed to [USER].
Adjusting desired white balance
1)
Press as to select [COLOR TEMPERATURE].
2)
Press qw or the <ENTER> button.
f
The [COLOR TEMPERATURE] individual adjustment screen is displayed.
3)
Press qw to select [USER].
4)
Press the <ENTER> button.
f
The [COLOR TEMPERATURE] screen is displayed.
5)
Press as to select [WHITE BALANCE].
6)
Press the <ENTER> button.
f
The [WHITE BALANCE] screen is displayed.
7)
Press as to select [WHITE BALANCE HIGH] or [WHITE BALANCE LOW].
8)
Press the <ENTER> button.
f
The [WHITE BALANCE HIGH] screen or the [WHITE BALANCE LOW] screen is displayed.
9)
Press as to select [RED], [GREEN], or [BLUE].
10)
Press qw to adjust the level.
Item Operation Adjustment Range
[RED]
Press the
w
button. Deepens red.
[WHITE BALANCE HIGH]: 0 - 255 (factory default is 255)
[WHITE BALANCE LOW]: -127 - 127 (factory default is 0)
Press the
q
button. Weakens red.
[GREEN]
Press the
w
button. Deepens green.
Press the
q
button. Weakens green.
[BLUE]
Press the
w
button. Deepens blue.
Press the
q
button. Weakens blue.
Note
f
Adjust [COLOR TEMPERATURE] correctly. All colors will not be displayed properly unless adequate adjustment is made. If the adjustment
does not look suitable, you can press the <DEFAULT> button on the remote control to return the setting for the selected item only to the
factory default setting.
f
The setting of [COLOR TEMPERATURE] is not reected in internal test patterns (
x
page 82). Make sure to set [COLOR TEMPERATURE]
while projecting input signal.
Changing the [USER] name
1)
Press as to select [COLOR TEMPERATURE].
2)
Press qw or the <ENTER> button.
f
The [COLOR TEMPERATURE] individual adjustment screen is displayed.
3)
Press qw to select [USER].
4)
Press the <ENTER> button.
f
The [COLOR TEMPERATURE] screen is displayed.
5)
Press as to select [COLOR TEMPERATURE NAME CHANGE].
6)
Press the <ENTER> button.
f
The [COLOR TEMPERATURE NAME CHANGE] screen is displayed.
7)
Press asqw to select the text, and press the <ENTER> button to enter the text.
8)
Press asqw to select [OK], and press the <ENTER> button.
f
The name set to color temperature is changed.