Panasonic PT-RZ370U Projector User Manual


 
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 77
Note
f
Refer to “<SERIAL IN> terminal” (
x
page 118).
f
When [DIGITAL LINK] is selected, communication is only available using the serial terminal when the relevant device (such as an optional
digital interface box (Model No.: ET-YFB100G)) is connected to the <DIGITAL LINK/LAN> terminal.
f
When transferring logos via the optional digital interface box (Model No.: ET-YFB100G), “NO SIGNAL SLEEP” of ET-YFB100G must be set
to “OFF” to avoid cutting off communication.
f
When [DIGITAL LINK] is selected, communication speed is xed to 9 600 bps.
[FUNCTION BUTTON]
Displays the functions that are currently assigned to the <FUNC1> - <FUNC3> buttons on the remote control. Also, cancel the assigned
settings.
Canceling the assigned settings of the <FUNC1> - <FUNC3> buttons
1)
Press as to select [FUNCTION BUTTON].
2)
Press the <ENTER> button.
f
The [FUNCTION BUTTON] screen is displayed.
3)
Press as to select the function button (F1 - F3) where to cancel the assignment.
4)
Press the <DEFAULT> button on the remote control.
5)
When the confirmation is displayed, select [OK] and press the <ENTER> button.
Note
f
You can also cancel the assigned settings by displaying the on-screen menu, selecting the menu item to be canceled (main menu, sub-
menu, or details menu), and then pressing any one of the corresponding <FUNC1> - <FUNC3> buttons for at least three seconds.
[AUDIO SETTING]
Sets advanced audio functions.
Adjusting the volume
1)
Press as to select [AUDIO SETTING].
2)
Press the <ENTER> button.
f
The [AUDIO SETTING] screen is displayed.
3)
Press as to select [VOLUME].
4)
Press qw to adjust the level.
Operation Adjustment Range
Press the
w
button. The volume increases. Maximum value 63
Press the
q
button. The volume decreases. Minimum value 0
Adjusting the left/right audio balance
1)
Press as to select [AUDIO SETTING].
2)
Press the <ENTER> button.
f
The [AUDIO SETTING] screen is displayed.
3)
Press as to select [BALANCE].
4)
Press qw to adjust the level.
Operation Adjustment Range
Press the
w
button. The right volume increases.
L16 - R16
Press the
q
button. The left volume increases.