Filter
Top Products
Chapter 4 Settings — [SECURITY] menu
86 - ENGLISH
[TEXT DISPLAY]
Overlap the security message (text) over the projecting image.
1)
Press as to select [TEXT DISPLAY].
2)
Press qw to switch [TEXT DISPLAY].
f
The items will switch each time you press the button.
[OFF] Hides the security message.
[ON] Displays the security message.
Note
f
If a closed caption signal of the selected mode is input, the security message is not displayed.
[TEXT CHANGE]
Change the text displayed when [TEXT DISPLAY] is set to [ON].
1)
Press as to select [TEXT CHANGE].
2)
Press the <ENTER> button.
f
The [TEXT CHANGE] screen is displayed.
3)
Press asqw to select the text, and press the <ENTER> button to enter the text.
f
Maximum 22 characters can be input.
4)
Press asqw to select [OK], and press the <ENTER> button.
f
The text is changed.
[MENU LOCK]
Display the menu with the <MENU> button, and set whether to enable menu operations.
1)
Press as to select [MENU LOCK].
2)
Press qw to switch [MENU LOCK].
f
The items will switch each time you press the button.
[OFF] Cancels the lock on menu operations.
[ON] Locks menu operations.
Note
f
After setting [MENU LOCK] to [ON], if the wrong password is input, the <MENU> button cannot be operated.
f
At the time of purchase or after [ALL USER DATA] initialization, [MENU LOCK] is set to [OFF].
f
The lock release is maintained until the projector enters standby.
[MENU LOCK PASSWORD]
Change the menu lock password.
1)
Press as to select [MENU LOCK PASSWORD].
2)
Press the <ENTER> button.
f
The [MENU LOCK PASSWORD] screen is displayed.
3)
Press asqw to select the text, and press the <ENTER> button to enter the text.
f
Maximum 16 characters can be input.
4)
Press asqw to select [OK], and press the <ENTER> button.
f
To cancel, select [CANCEL].
Attention
f
The initial password when used for the rst time or after initializing all the user data is “AAAA”.
f
Change the password periodically that is hard to guess.