Filter
Top Products
27
RQT8739
SREAKERS B
•
Playback is in 2-channel stereo when you select “SPEAKERS B” only.
• When only “SPEAKERS B” is selected and the input source is
surround, “2CH MIX” appears on the display.
• Selected speakers output sounds assigned to front 2 channels
when you make DVD ANALOG 6CH connections.
•
If you select “SPEAKERS B” only, the following are set automatically irrespective of
settings selected in “Setting speakers and their sizes” (
á
page 35).
Speaker size: “LARGE ”
Subwoofer: “NO ” (Bass is output from the front speakers.)
• Settings made through the auto speaker setup (á pages 24
and 25) are canceled.
MULTI ROOM
• When you press [SPEAKERS A] or [SPEAKERS B],
consolidated 2-channel stereo sound is output from front and
surround speakers (in the original room).
MULTI ROOM is canceled when you press [SPEAKERS A] or [SPEAKERS B].
• BI-AMP or ADVANCED DUAL AMP turns off when you
perform MULTI ROOM playback.
•
“
SPEAKERS ARE OFF
” is displayed when you press and hold [SPEAKERS
B] for 2 seconds without selecting “SPEAKERS A” and “SPEAKERS B”.
ADVANCED DUAL AMP (á page 39)
•
The unit takes advantage of unused amps, and runs one speaker with 2
amps when this function is on. ADVANCED DUAL AMP offers you
sounds that are clearer and higher in audio quality than those available
in normal playback. In 2-channel stereo playback, 3 speaker amps drive
front speakers. The operation is called the triple amp mode.
2-channel stereo playback: Front, surround and surround back
speaker amps are used for driving front speakers (triple amp mode).
5.1-channel playback: Front and surround back speaker amps
are used for driving front speakers (dual amp mode).
•
When surround speakers are connected wirelessly (
á
page 21), the
unit uses the wireless system amp for 5.1-channel playback. Under
the condition, front speakers are driven in the triple amp mode.
BI-AMP (á page 39)
•
The unit takes advantage of the front speaker and the surround
speaker amps, and drives the speakers’ high-frequency and low-
frequency ranges separately when this function is on.
•
ADVANCED DUAL AMP is available with BI-AMP. When combined, the
two functions enhance clarity and audio quality of stereo sounds.
•
When you make bi-wire setting (
á
page 20), both BI-AMP and
ADVANCED DUAL AMP take effect as long as overlap is possible. In
such case, ADVANCED DUAL AMP activates in the dual amp mode.
Select “
OFF
” in “Canceling BI-AMP (using the triple amp mode)”
(
á
page 36) when you wish to use the triple amp mode.
• You cannot use BI-AMP with analog 6-channel connections for
DVD-Audio sources.
Playing DVD-Audio
Make the following speaker settings on the DVD recorder or the
DVD player. (They are normal factory settings for the DVD
recorder and the DVD player.)
• Speaker size: “LARGE ” for all speakers
• Speaker presence: present for all speakers
• Distance setting: 0 or an equal distance for all speakers
Using
SPEAKERS B
Sound is output from the speakers connected to the FRONT B terminals on this unit.
Press to switch “ ” on.
To turn off speakers connected
to the FRONT A terminals
Switch “ ” on the display off by
pressing [SPEAKERS A].
MULTI ROOM
The wireless speaker unit outputs 2-channel stereo sound.
Select “
MULTI ROOM
” in “Making MULTI ROOM setting” (
á
page 22).
Press and hold for 2 seconds.
• When the function is on, the “MULTI
ROOM” indicator lights on.
• This function is not available while
muting is on.
ADVANCED
DUAL AMP
ADVANCED DUAL AMP activates automatically when you use 2-channel stereo playback or 5.1-channel playback.
The “ADVANCED DUAL AMP” indicator stays on while this function
is on.
• You can also set the ADVANCED
DUAL AMP off (á page 36).
BI-AMP
This function activates automatically when you play analog audio sources or 2-channel PCM signals through bi-wire connections.
• Connect bi-wire speakers
(
á
page 20).
• Select “YES ” in “Making bi-wire setting” (á page 20).
• Press [SURROUND] off (á pages 12 and 26).
• The “BI-AMP” indicator stays on while
BI-AMP is at work.
• Refer to “Making BI-AMP settings”
(á page 36) for detailed settings.
Playing
DVD-Audio
Enjoying DVD-Audio
sources through
digital connections
Connect the unit to a DVD recorder or DVD player using the HDMI cable (
á
page 7) or a
digital cable (COAXIAL1) (
á
pages 14 and 15).
Playing DVD
ANALOG 6CH
•
Make analog 6-channel connections (
á
page 18).
• Select “SPEAKERS A” or turn bi-wire
speakers on (á page 26).
•
Switch the input source to “
BD/DVD
” (
á
page 26).
Press and hold until
“DVD 6CH ” is displayed.
When the unit is connected to a
DVD recorder
Playback is unavailable while the
input source is “DVR ”. Make
analog 6-channel connections and
switch the mode to “BD/DVD ”.
• To cancel, press and hold until
“BD/DVD
” is displayed.
Enjoying high
quality 2-channel
analog sounds
You can enjoy high quality stereo sound with 192 kHz 2-channel DVD-Audio.
1 Cancel the “DVD 6CH ” setting. (above)
2 Set the input signal to “ANALOG ” in “Setting input signals”. (
á page 37)
B
SPEAKERS
B
B
SPEAKERS
A
B
SPEAKERS