Filter
Top Products
47
RQT8739
Remote controlling a CD player
To switch the unit’s
input to “CD ”/
To switch the remote
control to the CD
player operation
mode
Do not forget to
press this before
operating a CD
player.
To turn the CD player
on or off
To start playback
To skip a track
To search through the
disc
To pause
To specify a disc
(3-or 5-disc changer)
To start play from a
specified disc [MEGA
CD changer] (holds
more than 50 discs)
To select a track
directly
To stop playback
CD
AV
SYSTEM
PLAY
SKIP
SLOW/SEARCH
PAUSE
DISC
DIRECT
TUNING
0
PLAY
DISC
DIRECT
TUNING
0
ENTER
STOP
Two or more Panasonic audio equipment
may start functioning when you operate
the unit using the supplied remote control.
Set the unit’s remote control mode to
“REMOTE 2 ” in such cases.
Do the following to set the same number
(2) as the remote control code.
Using two or more Panasonic equipment
(a mini component system, an AV amp etc.)
Operation on the unit
1
Press and hold [-MENU/
–SETUP, RETURN] for about
2 seconds to enter the SETUP.
2
Select and confirm the choice.
3
Select and confirm the choice.
4 Select and finish the setting.
Operation on the remote control
5 Press
6 Press and
simultaneously and hold
them in the position for
about 2 seconds.
When you return the remote
control code to “1 ”
•
Operation on the unit: select “
1
” in step
3
.
•
Operation on the remote control: in step
6
, press [ENTER] and [1] simultaneously
and hold them in the position for about 2
seconds.
SPEAKERS
-MENU/
-
SETUP
ENTER
INPUT SELECTOR
BI-AMP
SURROUND
SURROUND
SPEAKERS
AUTO DETECTOR
-
MULTI
ADVANCED DUAL AMP
POWER
WIRELESS READY
MULTI ROOM
RETURN
SURROUND
SPEAKERS
ENTER
-
MENU/
-
SETUP
AUTO DETECTOR
-
MULTI R
RETURN
INPUT SELECTOR
INPUT SELECTOR
-
MENU/
-
SETUP
ENTER
RETURN
ENTER
-
MENU/
-
SETUP
RETURN
Basic operation
Turn to select.
Press to confirm
your choice.
To return to the
previous display/
To cancel
TUNER
BAND
ENTER
This remote control can operate Panasonic audio-
visual equipment that has remote control sensors.
You may need to change the remote control code.
It can also operate some other brands of TVs,
VCRs, and DVD players. Check the table for the
brand and enter the code as follows.
• Note that this remote control cannot
operate some equipment and that it may
not be able to perform some operations.
• Re-enter the codes after you change the
batteries.
Code table
Entering a code to operate other equipment
Changing the codes
The remote control outputs the on/off signal.
If the code is correct, the equipment
turns on or off.
If it doesn’t, try entering another code.
TV VCR
DVD player
PANASONIC 0051/0250/
1492
0227/1244 0490/0491
AIWA – – 0641
APEX – – 0856/1352
BOSE – – 2023
DENON – – 0634
FISHER 1096 0046/0047/
0054/0066
–
FUNAI –0184–
G.E. 0047/0051/
0747
0760/0761/
1613
–
GOLD STAR 1240 1237 –
HARMAN KARDON
– – 0702
HITACHI 1145 0042/1613 0664
JVC 1053 0008/0067/
0384/0486
0623
KENWOOD – – 0737/1579
KONKA – – 0711
KOSS – – 1608
MAGNAVOX 0056/0694/
1308/1694
0035/0226/
0563
–
MINTEK – – 1472
MITSUBISHI 0150 0043/0075/
0196/1617
1521
NEC – 0038/0050 –
NEXTBASE
– – 0826
ONKYO
– – 0627/1891
ORITRON
– – 0651
PHILIPS –05630539
PIONEER 1487 – 0571
QUASAR 0051 – –
RAITE – – 0665
RCA 0747/1047/
1490/1491
0042/0051 0522
SAMPO – – 0698
SAMSUNG – – 0573
SANYO – 0104 –
SHARP 0093/0165 0048/0062 1606
SHINTOM – 0753 –
SILVANIA – – 0675
SMC – – 0811
SONY 0810 0033/0034/
0586/0639/
0640/1232
1033/1604/
1607/1633
SYNPHONIC 0180 0000 –
TOSHIBA 1488 0057/0210 1459
VENTURER – – 1821
WAVE – – 0709
YAMA HA – – 0817
ZENITH 0016/0017 0039 0741/1605
VCR
TV
BD/DVD
PLAYER
ANALOG 6CH
0
TV VCR DVD player
Press and hold the button
corresponding to the equipment.
e.g. 0250
, Press [0] → [2] → [5] → [0]
Remote controlling a TV or DVD recorder etc.
Operations