Filter
Top Products
42
Basic Transmission Settings
You can temporarily change the transmission settings either before or after you place the document on the
ADF.
These settings are as follows
•Contrast
• Resolution
• Halftone
•Stamp
• Communication Journal
After your document(s) have been sent, your machine will automatically return to the preset settings.
Your machine is preset to Normal contrast. If you wish to send a document with lighter contrast, change the
setting to Lighter. If you wish to send a document with darker contrast, change the setting to Darker.
Press to:
Your machine is preset to Standard resolution, which is suitable for most documents.
Use Fine or Super Fine for detailed documents.
Press to:
NOTE
1. To change the preset Contrast position, change the setting of Fax Parameter No. 01. (See
page 36)
2. To change the preset Resolution position, change the setting of Fax Parameter No. 02. (See
page 36)
3. If you send a photographic document with Halftone set to Fast or Quality and the Resolution
set to Super Fine (406 pels/inch x 391 lines/inch), the reproduction of the received document
will be determined by the capability of the remote station.
General Description
Contrast
Resolution
CONTRAST
CONTRAST
LIGHTER
DARKER
CONTRAST
LIGHTER
DARKER
CONTRAST
LIGHTER
DARKER
CONTRAST = Normal CONTRAST = Lighter CONTRAST = Darker
RESOLUTION
RESOLUTION
FINE
S - FINE
RESOLUTION
FINE
S - FINE
RESOLUTION
FINE
S - FINE
RESOLUTION = Standard RESOLUTION = Fine RESOLUTION = Super Fine