Filter
Top Products
Sending Documents
60
Automatic Redialing
Manual Redialing
You can also redial the last dialed number manually by pressing key.
NOTE
1. While the unit is displaying "WAIT TO DIAL", you can press to start redialing
immediately.
Redialing
If a busy line is detected, the machine will redial the number up to 5 times
at 3 minutes interval. However, if a busy line is not detected, the machine
will redial only one time. During that time, a message will appear as shown
to the right.
A file number is shown in the upper right hand corner of the display if it is a memory
transmission file.
WAIT TO DIAL NO.001
<01>(Station name)
To redial the last dialed number through memory
1
Set document(s) face down.
Make sure that the MEMORY lamp is on.
ENTER STATION(S)
THEN PRESS START 00%
2
TEL. NO.
5551234
3
The document is stored into memory with a file number.
Then dials the last dialed number.
* STORE * NO.002
PAGES=001 01%
* DIALING * NO.002
5551234
To redial the last dialed number through ADF
1
Set document(s) face down.
ENTER STATION(S)
THEN PRESS START 00%
2
Make sure that the lamp goes off.
ENTER STATION
00%
3
Your machine starts to dial the last dialed number.
PRESS START TO DIAL
5551234
* DIALING *
5551234
REDIAL
PAUSE
REDIAL
START
MEMORY
PAUSE
REDIAL
START
REDIAL