Filter
Top Products
Sending Documents
47
Memory Transmission
Basic Operations
Manual Number Dialing
To dial the telephone number manually, follow the steps below.
NOTE
1. If you need a special access number to get an outside line, dial it first then press to
enter a pause (represented by a "-") before dialing the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing,
press (represented by a "/").
The dialing mode will be changed from Pulse to Tone after dialing the digit "/".
Ex: 9 PAUSE TONE 5551234
3. This feature is called “Quick Memory Transmission”. If you wish to store all the document(s)
into memory first before transmitting, change the Fax Parameter No. 82 (QUICK MEMORY
XMT) to “ Invalid”. (See page 39)
1
Set document(s) face down.
ENTER STATION(S)
THEN PRESS START 00%
2
Make sure that the MEMORY lamp is on.
If not, press “On”. to set “On”.
3
Enter a telephone number from the keypad.
Ex:
TEL. NO.
5551234
❚
4
The document is stored into memory with a file number.
Then starts dialing the telephone number immediately
after storing the first page. (See Note 3)
The remaining page(s) continue to store into memory.
* STORE * NO.002
PAGES=001 05%
* DIALING * NO.002
5551234
MEMORY
MEMORY
5 5 5 1 2 3 4
START
PAUSE
TONE