Filter
Top Products
34
Customizing Your Machine
Your facsimile machine has a variety of adjustable Fax Parameters. These parameters, listed in the Parameter
Table, are preset for you and do not need to be changed. If you do want to make a change, read the table carefully.
Some parameters, such as the Resolution, Contrast, and Verification Stamp parameters, can be temporarily
changed by simple key operation just before a transmission is made. When the transmission ends, however, these
parameters return to their preset values (Home position). Other parameters can only be changed by the procedure
described below.
Setting the Fax Parameters
(see Note 1) (see Note 2)
1
2
3
Enter Fax Parameter number from the Parameter Table.
(See pages 35 to 38)
Ex: for CONTRAST
4
5
Enter the new setting value.
Ex: for LIGHTER
6
To set another parameter, press to return to step
3 or press to return to standby.
1. To scroll the Fax Parameters in Step 2 or 4, press or .
2. To print out a Fax Parameter List, see page 153.
FUNCTION
7
SET MODE (1-6)
ENTER NO. OR
∨ ∧
4
SET
FAX PARAMETER(01-99)
NO.=
❚
0 1
FAX PARAMETER(01-99)
NO.=01
SET
01 CONTRAST
1:NORMAL
2
01 CONTRAST
2:LIGHTER
SET
CLEAR
STOP
02 RESOLUTION
1:STANDARD
Note: