Filter
Top Products
50
Multi-Station Transmission (Broadcasting)
If you have to send the same document(s) to multiple stations, you can save time in feeding the document(s) by
using memory transmission. That is, you can store the document(s) into memory and then send it to the
station(s) automatically.
(see Note 1)
(see Note 2)
1
Set document(s) face down.
2
Make sure that the MEMORY lamp is on.
If not, press to set “On”.
3
Dial by any combination of the following methods:
• One-Touch Dialing
• Abbreviated Dialing
• Manual Number Dialing, press after each
station is entered
(UF-895: Up to 70 stations, UF-885: Up to 32 stations)
• Directory Search Dialing, press after each
station is entered
(For details, see page 46 to 49.)
Ex:
If you want to confirm the number of stations you have
entered, press .
4
All document(s) are stored into memory with a file number.
(See Note 2)
Then starts dialing the telephone numbers in sequence.
1. You can review the stations you entered in step 3 before storing your document into memory by pressing
or . Press to clear an entered station or group shown on the display if needed.
2. The “Quick Memory Transmission” is disabled if multiple stations are set.
ENTER STATION(S)
THEN PRESS START 00%
MEMORY
MEMORY
SET
SET
01
ABBR
0
1
0
SET
<01>(Station name)
5551234
[010](Station name)
5553456
2 STN(S) ARE SET
ADD MORE OR START
START
* STORE * NO.001
PAGES=001 01%
* STORE * COMPLETED
TOTAL PAGE=005 25%
* DIALING * NO.001
(Station name)