Filter
Top Products
88
Printing Out Documents
After receiving a document with the Receive To Memory feature, the following message will appear on the display.
To print the document, follow the steps below.
(see Note 1) (see Note 2)
1
2
3
4
5
Enter the password to print the documents.
(See Note 1)
Ex:
6
Machine will start to print the documents.
1. If the password has not been set, your machine will not prompt you to enter the password.
The documents will be printed immediately after pressing in step 4.
2. Once the RCV TO MEMORY feature is set to "On", the password cannot be changed (Fax Parameter No. 37 will
not be shown on the LCD display). If you wish to change the password, set RCV TO MEMORY feature to “Off” first.
Then change the password. (See page 87)
MESSAGE IN MEMORY
< RCV TO MEMORY >
FUNCTION
8
SELECT MODE (1-5)
ENTER NO. OR
∨
∧
5
SET
RCV TO MEMORY=ON
1:OFF 2:ON 3:PRINT
3
RCV TO MEMORY=PRINT
1:OFF 2:ON 3:PRINT
SET
INPUT PASSWORD
❚❚❚❚
1 2 3 4
INPUT PASSWORD
1234
SET
* PRINTING *
MEMORY RCV’D DOC
SET
Receive To Memory
Note: