Filter
Top Products
46
Manual Number Dialing
To dial the telephone number manually, follow the steps below. (see Note 1) (see Note 2)
(see Note 3)
1
Set document(s) face down.
2
Make sure that the MEMORY lamp is on.
If not, press to set “On”.
3
Enter a telephone number from the keypad.
Ex:
4
The document(s) begin to store into memory with a file
number.
Then starts dialing the telephone number immediately after
storing the first page. (See Note 3)
The remaining page(s) continue to store into memory.
1. If you need a special access number to get an outside line, dial it first then press to enter a pause
(represented by a "-") before dialing the full number.
Ex
: 9 PAUSE 5551234
2. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing, press
(represented by a "/").
The dialing mode will be changed from Pulse to Tone after dialing the digit "/".
Ex
: 9 PAUSE TONE 5551234
3. This feature is called “Quick Memory Transmission”. If you wish to store All the document(s) into memory first
before transmitting, change the Fax Parameter No. 82 (QUICK MEMORY XMT) to “ Invalid”. (See page 38)
ENTER STATION(S)
THEN PRESS START 00%
MEMORY
MEMORY
5 5 5 1 2 3
4
TEL. NO.
5551234
❚
START
* STORE * NO.002
PAGES=001 05%
* DIALING * NO.002
5551234
PAUSE
TONE
Sending Documents
Note: