Paradyne 3821PLUS Network Card User Manual


 
COMSPHERE 3821Plus Modem
3-2 February 1998 3821-A2-GB20-30
Menu Structure
An elaborate menu of options is available from a
Shared Diagnostic Control Panel (SDCP).
The menu tree is a hierarchical structure used to
display functions that configure and control local and
remote 3821Plus modems. It is accessed via the SDCP
and is shown in its entirety in Appendix A.
The menu tree contains the following branches:
Modem Select Used to select one of the three
modems on the card. The
modem shown in uppercase
characters is the modem
connected to the SDCP.
Quick
Configuration
Display
This hidden menu item
displays information about the
modem’s configuration, such
as line mode and rate.
Call Setup Used to dial, disconnect, and
answer telephone calls as well
as store up to 10 telephone
numbers in directory locations.
Status Used to monitor the current
status of the VF line and DTE
interface as well as view the
identity of the modem.
Test Used to begin and end various
modem tests.
Configure Used to change and save the
modem’s configuration
options.
Control Used to control the modem’s
hardware and software
functions.
Remote Used to access and control a
remote 3800Plus modem. See
Chapter 6, Remote Access.
Security Used to control the modem’s
dial access security. See
Chapter 7, Security.
495-14520-0
1
Call_Setup Control
Test
SecurityConfigure
Remote
Status
(Modem Status)
MDMA mdmb mdmc