Paradyne 3821PLUS Network Card User Manual


 
COMSPHERE 3821Plus Modem
3-16 February 1998 3821-A2-GB20-30
Activ
(
Operating)
Active
(Saved)
Customer1
Customer2
Factory
Async_Dial
Sync_Dial
Sync_Leased
UNIX_Dial
Choose Mode
Answer
Originate
Ld EditArea frm:
Edit Save
Choose Function
Active (Saved) Customer1 Customer2
DTE_Interface
DTE_Dialer
Line_Dialer
Dial_Line
Leased_Line
V42/MNP/Buffer
Test
Misc
Securit
y
98-14845-0
1
Configure
Call_Setup Control
Test
Security
Remote
Status
(Modem Status)
MDMA mdmb mdmc
Cellular
(Mobile)
Cellula
r
(PSTN
)
*
*
*
Available if ETC is installed
Editing and Saving a Configuration Option
The following example shows how to change the
Remote Access Password using the SDCP. (If you ever
intend to access another 3800Plus modem via the
Remote branch of the Top-Level menu, the Remote
Access Password must be the same for both modems.)
By following these procedures you learn how to load a
factory preset configuration area (in this case, Async
Dial), how to edit a configuration option (Remote Access
Password), and how to save changes to a configuration
area (Active (Saved)). The shaded key indicates what
key to press.
F1
Idle : 33.6 ¹
Test Configure
F2
F3
Select Configure from the Top-Level menu.
F1
Ld EditArea frm >
Activ (Operating)
F2
F3
F1
Ld EditArea frm <
Factory
F2
F3
Select the Factory configuration area.
F1
Ld Fact Preset : >
Async_Dial
F2
F3
Select Async_Dial.
F1
Choose Function
Edit Save
F2
F3
Select Edit.
F1
Edit StrapGroup >
DTE_Interface
F2
F3