Filter
Top Products
MIB Descriptions
C-2
7112-A2-GB20-10March 1998
H Transmission Group Objects. Supported on the:
— DS1 network interface using the DS1 Enterprise MIB.
— User Data (DTE) port and Terminal port using the RS-232-like MIB.
— 10BaseT port using the Ethernet-like MIB.
H SNMP Group
The following MIB II groups are not supported:
H Address Translation Group
H Exterior Gateway Protocol (EGP) Group
H Generic Receive Address Table
System Group
System Group objects are fully supported by the unit.
Table C-1. System Group Objects (1 of 2)
Object, OID, Access
Description Setting/Contents
sysDescr
(system 1)
1.3.6.1.2.1.1.1
read-only
Provides a full name and
version identification for the
system’s hardware and
software.
PARADYNE T1 DSU/CSU
;
Model: 7112-
xx
-
xxx
;
S/W Release:
yy.yy.yy;
H/W CCA number:
zzzz-zzz;
Serial number:
sssssss
sysObjectID
(system 2)
1.3.6.1.2.1.1.2
read-only
Identifies the network
management subsystem.
1.3.6.1.4.1.1795.1.14.2.5.2
sysUptime
(system 3)
1.3.6.1.2.1.1.3
read-only
Identifies the length of time
since last unit IPL.
Days, hours, minutes, and
seconds since last IPL.
sysContact
(system 4)
1.3.6.1.2.1.1.4
read-write
Provides the textual
identification of the contact
person for this managed
unit.
1
ASCII character string, as set
by the user.
sysName
(system 5)
1.3.6.1.2.1.1.5
read-write
Provides an
administratively-assigned
name for this managed unit.
1
ASCII character string, as set
by the user.
sysLocation
(system 6)
1.3.6.1.2.1.1.6
read-write
Provides the physical location
for this managed unit.
1
ASCII character string, as set
by the user.