Filter
Top Products
Index
IN-3
8700-A2-GB20-00 April 2000
I
identity, 3-2
impedance, A-12
inactivity timeout, for Telnet session, A-24
intended audience, vii
IP address
DSL peer, A-4
example, 5-2
selecting, 5-1
SNMP manager, 6-5
K
keyboard functions, 2-6
L
lamp test, 8-9
LEDs
front panel, 7-19
testing, 8-9
viewing through the ATI, 7-17
Line Coding, A-9
DSX-1, A-6
Line Equalization, A-7
Line Framing
DS0 Cross Connect, A-4
DSX-1, A-7
G.703, A-9
Line Loopback, 8-4
Link Up, LEDs, 7-19
link-layer protocols, 5-1
linkUp and linkDown traps, B-3
loading firmware, 9-3
local line loopback (LLB), 8-4
LOF (Loss Of Frame), status message, 7-4
login, DSLAM, 2-2
login ID, 6-1
access levels, 6-2
adding, 6-3
deleting, 6-4
loopback
DTE Loopback, 8-6
effect on LEDs, 7-19
Network Line Loopback, 8-4
Remote Send Line Loopback, 8-7
Repeater Loopback, 8-5
Telco-initiated, 8-11
LOS (Loss Of Signal), status message, 7-4
M
main menu, 2-2
Management and Communication Options, A-23
management port
access, 6-1
settings, 2-1
Margin Threshold, A-2
Max DSL AutoRate, A-3
maximum payload rate, A-5
MCC, defined, 1-2
Memory Test n Fail, self-test result, 7-6
messages
health and status, 7-3
line 24, 7-8
self-test results, 7-6
test status, 7-7
MIB
list of supported MIBs, 1-4
support, 1-4
monitoring, 7-1
N
navigating the screens, 2-6
Net Margin Threshold, status message, 7-4
network, tests, 8-2
Network Interface Options, A-2
AutoRate, A-3
Circuit Identifier, A-4
DS0 Cross Connect Line Framing, A-4
Excessive Error Rate Threshold, A-3
Margin Threshold, A-2
Peer IP Address, A-4
Port Status, A-2
Transmit Attenuation, A-4
Network Line Loopback, 8-4
NMS
IP address, A-28
Number of Trap Managers, A-30
SNMP access, 6-5
SNMP connectivity, 5-1
No Test Active, status message, 7-7
O
OK, LED, 7-19
OOF (Out Of Frame), status message, 7-5
options, configuration tables, A-1
overview
device features, 1-2
user’s guide, vii