Filter
Top Products
Initial Startup and Configuration
3-5
8700-A2-GB20-00
April 2000
Configuration Edit/Display
The Configuration Edit/Display screen appears when the current, customer, or
default configuration is loaded and allows groups of configuration options to be
displayed. To access the Configuration Edit/Display screen, follow this menu
selection sequence:
Main Menu →Configuration →Current Configuration
– or –
Main Menu →Configuration →Default Factory Configuration
main/config/edit
Slot: 4 Model: 87xx
CONFIGURATION EDIT/DISPLAY
Network
DSX-1 | G.703
Copy Ports
System Options
System Clock
Cross-Connect
Management and Communication
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu M
ainMenu Exit
S
ave
Select . . . To Access the . . . To Configure the . . .
Network Network Interface Options, Table A-1 DSL interface ports.
DSX-1
G.703
DSX-1 Interface Options, Table A-4
G.703 Interface Options, Table A-5
DSX-1 interface ports
(Models 8747 and 8777).
G.703 interface ports
(Model 8779).
Copy Ports Copy Ports Options, Table A-6 DSL network and DTE
interface ports by copying
options from port to port.
System
Options
System Options, Table A-7 General system options of
the unit.
System Clock System Clock Options, Table A-8 LTU system clock options.
Cross-Connect Cross-Connect Mode Options, Table A-9
Assign Time Slots Options, Table A-10
DS1 and DS0
cross-connect ports.
Management
and
Communication
Telnet Session Options, Table A-11
General SNMP Management Options,
Table A-12
SNMP NMS Security Options,
Table A-13
SNMP Traps Options, Table A-14
Management support of the
unit through SNMP and
Telnet.