Filter
Top Products
8-1
8700-A2-GB20-00
April 2000
Testing
8
Accessing the Test Menu
From the Test menu, you can run network tests, data port tests, and a front panel
lamp test.
To access the Test menu, follow this menu selection sequence:
Main Menu →Test
main/test
Slot: 18 Model: 87xx
TEST
Network & DSX-1 | G.703 Tests
Device Tests
Abort All Tests
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu M
ainMenu Exit
Select . . . To . . .
Network & DSX-1 Tests
Network & G.703 Tests
Start and stop tests on the DSX-1, G.703, or network
interface.
Device Tests Start and stop the Lamp Test.
Abort All Tests To abort current tests excluding network-initiated
loopback tests. An aborted test may continue to run for
a few seconds as the abort command is sent to the
remote end and processed.