Filter
Top Products
3.0 ADDITIONAL INFORMATION
3.1 Fan Module
The IPD4000E fan module is installed vertically to the right of the interface module
slots. It comes pre-installed and should not be removed unless it is being replaced. Fan
functionality is indicated by a FAN LED on your management module (all models): NO
illumination or solid GREEN illumination indicates all fans are currently functioning,
solid AMBER illumination indicates one or more of the four fans are no longer
functioning.
3.2 IPD4000E Interface Capacity
4 interface module slots
1 management module slot
8 RJ21 50-pin female Telco connectors
3.3 Technical Support
3.3.1 Net to Net Technologies' Web Site
The following information can be found at http://www.nettonet.com/support :
DSL Distance and Bandwidth Quick Reference Chart
Firmware Downloads (for applicable modules)
IPD4000E FRONT VIEW
Fan Module
MANAGEMENT MODULE
Fan LED
CAUTION
Do not operate the IPD4000E without a fan module or with a fan module that is not functioning properly.
Page 15 of 17IPD4000E Installation Instructions 220-0000097 rev01