Paradyne IPD4000E Network Card User Manual


 
Frequently Asked Questions
Net to Net Enterprise MIBs
Product Discontinuation Notices
Product Documentation
Visio Network Diagram Stencils
3.3.2 Technical Support Engineers
If you are unable to locate the answers to your questions online, please contact
Net to Net Technologies' Technical Support Department directly:
3.4 Regulatory Compliance
3.4.1 Site Selection Criteria
In choosing a location for the installation of this product:
z
Select a RESTRICTED ACCESS area where admittance is limited to trained and
authorized service personnel.
z
Ensure that the internal temperature of a rack containing this equipment will
not exceed the maximum recommended ambient temperature of 149°F (65°
C).
z
Place the chassis such that connecting cables will not become a tripping
hazard or pull loose from the chassis.
z
Do not block power supply vents or otherwise restrict airflow when installing
this equipment.
z
Ensure that installation of this equipment in a rack will not cause the rack to
become top-heavy or unstable.
z
Do not overload the electrical branch circuit of the power source for this
equipment.
z
For tabletop use, attach the enclosed rubber feet to the bottom of the
chassis.
z
For rack installation, attach the enclosed rack mount brackets to the sides of
the chassis with the screws provided.
3.4.2 Class A Equipment
3.4.2.1 US Federal Communications Commission (FCC)
Note: This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These
CUSTOMER LOCATION TECH SUPPORT EMAIL TECH SUPPORT PHONE
Europe, Middle East and Africa
support-emea@nettonet.com 44-0-1635-570953
United States
support@nettonet.com 1-877-638-2638
all other locations
support@nettonet.com 1-603-427-0600
NEBS:
GR-63-CORE; GR-1089-CORE
EMC:
FCC Part 15; CSA/C108.8; EN55022; EN55024
SAFETY:
UL 60950-1 1st Edition, UL Marking; CSA 22.2 No. 60950-1-03; EN60950-1:2001; CE
Marking
TELECOM:
ACTA968 (Part 68); ICCS-03; TBR12; TBR13
Page 16 of 17IPD4000E Installation Instructions 220-0000097 rev01