Filter
Top Products
41
APPENDIX D
PATTON NETLINK-T1™ MODEL 2710
INTERFACE PIN ASSIGNMENT
RJ-48C T1 (DS0) Network Interface
(Female Modular Jack)
Pin # Signal
1 RX Data (RING)
2 RX Data (TIP)
4 TX Data (RING)
5 TX Data (TIP)
TRS Jack (RS-232 Control Port
Signal
Pin # Source
Tx Data From Model 2710
Rx Data To Model 2710
Sleeve N/A
RS-232 Control Port (Signals at DB-25 Connector)
Signal
Pin # Source Signal Direction
3 Receive From 2710
2 Transmit Data To 2710
7 Ground
RS-232 Control Port (Signals at DB-9 Connector)
Signal
Pin # Source Signal Direction
3 Receive From 2710
2 Transmit Data To 2710
7 Ground
}
}
From Network
To Network
42
APPENDIX D
(continued)
PATTON NETLINK-T1™ MODEL 2710
INTERFACE PIN ASSIGNMENT
M/34 Connector, Terminal Interface
Pin # Signal
A GND (Earth Ground/Shield)
B SGND (Signal Ground)
D CTS (DCE Source)
E DSR (DCE Source, Always On)
F CD (DCE Source)
L LL (Local Loop, DTE Source)
M TM (Test Mode Indicator, DCE Source)
N RL (Remote Loop, DTE Source)
P TD (Transmit Data +, DTE Source)
R RD (Receive Data +, DCE Source)
S TD/ (Transmit Data -, DTE Source)
T RD/ (Receive Data -, DCE Source)
U XTC (Transmit Clock +, DTE Source)
V RC (Receiver Clock +, DCE Source)
W XTC/ (Transmit Clock -, DCE Source)
X RC/ (Receiver Clock -, DCE Source)
Y TC (Transmitter Clock +, DTE Source)
AA TC/ (Transmitter Clock -, DTE Source)
KK Aux. Power Input (+5VDC @ 300mA)