Filter
Top Products
8 • Printer Setup Users Manual Model 656/636
Memory Card Option Board (350016) - Slot 5 (from back)
Diskless Rom Bd. (281164) - Slot 4
Thermal Control Bd. (351105) - Slot 2
Head Control Bd. (351106) - Slot 1
TCB Dip Switch S2 Settings
TCB DIP SWITCH S2 SETTINGS
1 DPI OFF = 240 ON = 300
2 DPI (Undefined) OFF = Default ON =
3 MACHINE TYPE OFF = 656 ON = 636
4 MACHINE TYPE (Undefined) OFF = Default ON =
5 JAM SENSOR OFF = not installed ON = installed
6 UNDEFINED OFF = Default ON =
7 UNDEFINED OFF = Default ON =
8 UNDEFINED OFF = Default ON =
Installing the Power Cord
A power cord is shipped with each printer. The cord for 110 volt printers, will use
the standard three prong plug used in the U.S.A. A 220 volt printer and other 110
volt configurations must have the receptacle end of the connector removed and the
proper plug installed. It is the customers responsibility to have the plug and
alteration work done by a certified electrician. Paxar supplies printers to many
countries with many variations. Therefore we leave this to the customer to make the
proper selection for their country.