Filter
Top Products
Users Manual Model 656/636 Customer Responsibility • 3
Customer Responsibility
Location of Printer
The printer weighs approximately 57 Lbs (~26Kg) and requires a table of sufficient
quality and strength to handle this load while the printer is operating. PAXAR
recommends an industrial type work table having the approximate dimensions of 96"
wide to 30" deep to 32" high. Refer to Figure 1a.
Figure 1a Recommended workstation layout.
The location of the PAXAR 656 / 636 printer should be based on human factors.
The printer should be located in an area which maintains optimum flow of your
product while providing for the operator’s comfort. PAXAR has taken significant
steps to ensure that the operator controls and operations are easily accessible. This
goal can only be met, however, if the printer is also located with human factors in
mind. These include the height of the printer, the space around the printer, and the
accessibility to the printer.
The PAXAR 656 / 636 printer is a high resolution thermal printer. While PAXAR
has designed the printer to be reasonably quiet, it is recommended to location the
printer in an area where printing and cutting repetitious noise is acceptable.
The unit should always be operated with the cover closed to minimize the amount of
dust and dirt in the machine.