Filter
Top Products
Using Supplies 3-1
USING SUPPLIES
The printer can use three types of supplies:
♦ Labels
♦ Tags
♦ Receipt Paper
There are two print modes. The way you load the supplies depends on
the print mode you use.
♦
Peel mode
removes the backing paper from the supplies as it prints
the labels. This mode allows you to apply the label immediately. It is
only for labels. If you have purchased and selected the on-demand
sensor, you must press the trigger between labels. Otherwise, the
next label prints only when the previous one is applied.
♦
Non-Peel mode
does not remove the backing paper. It is for labels
printed in a continuous strip, tags, and receipt paper.
Loading Supplies
To load supplies:
1. Turn on the printer. The application starts running.
2. Maneuver to the point in the application where you are prompted to
load the supplies.
3