Filter
Top Products
Care and Maintenance 5-7
Scanner Flex Cable
Occasionally, adhesive buildup will appear on the scanner flex cable, as
shown above. To clean the cable:
1. Turn the printer off and open the supply cover.
2. Inspect the scanner flex cable. At any place that adhesive buildup
appears, clean the cable with 99% isopropyl alcohol.
3. Close the supply cover.
Clearing Supply Jams
To clear a supply jam:
1. Turn off the printer.
2. Open the supply cover completely.
3. Open the label deflector by gently pressing down on it with two
fingers.
4. Remove the supplies. See “Removing Supplies” in Chapter 3.
Adhesive
Buildup
Scanner Flex
Cable