![](http://pdfasset.owneriq.net/f/a3/fa309967-e66b-4082-a015-32f2759be713/fa309967-e66b-4082-a015-32f2759be713-bg1c.png)
4-4 Basic Operations
To scan a bar code:
1. Attach the safety strap to your wrist.
2. Point the scanner at a slight angle approximately 4 – 8 inches from
the bar code symbol.
3. Press the trigger or other key specified by your System Administrator.
CAUTION: Do Not stare into the beam.
The laser scan LED lights green after a successful scan. It lights amber
after an unsuccessful scan. This light is at the upper right of the keypad,
to the left of the On/Off key.