Filter
Top Products
C1519M-D (3/06) 17
Figure 12. Main Menu 1
LOG
O
FF
PRSTGPIMUX
1 1
00904
MUX
GPI
PRST
LOG
O
FF
Figure 13. Main Menu 2
1 1
SEQ
DEF
MAC
00905
MAC
SEQ
DEF
ACCESSING THE KBD960 MENUS
1. Set DIP switch 2 OFF.
2. Enter the number of the monitor and then press .
3. Press and the Main Menu 1 icons appear.
Table B. Main Menu 1
MAIN MENU 1
Select to bring up the Monitor Menu. If you enter a number before
selecting this icon, the monitor number changes to that number.
Select to bring up the Camera Menu. If you enter a number be-
fore selecting this icon, the camera number changes and the
camera switches on the current monitor without going into the
Camera Menu.
Select to bring up the MUX Menu. You can enter a number be-
fore selecting this icon. If you enter a number before selecting
this icon, the multiplexer number changes and the system
switches to that multiplexer without going into the MUX Menu.
When an alarm is triggered, this icon appears on the keyboard
screen. The current alarm shown on the user monitor is the
alarm that appears when the Alarm Menu is selected.
Select to bring up the GPI Menu. If you enter a GPI number be-
fore selecting this icon, control and data information are re-
quested for the selected GPI.
Select to bring up the Preset Menu. If you enter a number before
selecting this icon, the preset is called without the Preset Menu
being displayed.
Select to bring up the next page (Main Menu 2).
Select to log off the system.
Table C. Main Menu 2
MAIN MENU 2
Select to bring up the Macro Menu. If you enter a macro number
before selecting this icon, the selected macro plays without hav-
ing to go into the Macro Menu.
Select to bring up the Sequence Menu. If you enter a sequence
number before selecting this icon, the selected sequence plays
without going into the Sequence Menu.
Select to bring up Define Menu 1. You will see
PIN
and
LCD
.
Enter your define PIN. You will not have to re-enter your define
PIN unless the keyboard goes offline or you log off. When you
enter your PIN, Define Menu 2 appears. You will also see
LCD
in Define Menu 2. You can adjust the display brightness in De-
fine Menu 1 or Define Menu 2.
or Selecting either one returns you to Main Menu 1.