Filter
Top Products
38 C1519M-D (3/06)
MACROS
A macro is a sequence of commands or steps. When you run a macro, the steps
programmed into that macro are performed. Macros can be run manually or
automatically. Automatic operation can be the result of alarms or the reaching of
specific times and dates.
If you want to start a macro, make sure no other keyboard has control of the PTZ
on the monitor that you want the macro to start on.
When a macro completes all its steps, it stops and only runs again if restarted. A
continuous macro runs until you clear it or stop it.
To set up a macro, you must bring up the CM6800 Programming Main Menu from
the KBD960 or use the CM6800-MGR Program Manager.
STARTING MACROS
There are two ways you can start a macro. For example, follow these steps to
start macro number 1:
1. Go to Main Menu 2.
2. Select
MAC
.
3. Select or to scroll to macro number 1.
4. Select or to start the macro.
or
1. Go to Main Menu 2.
2. Enter 1.
3. Select
MAC
.
STOPPING MACROS
There are two ways you can stop a macro. Follow these steps to stop macro
number 1:
1. Go to Main Menu 2.
2. Enter 1.
3. Select
MAC
.
or
1. Go to the Macro Menu.
2. Select or to scroll to macro number 1.
3. Select either , , or .
PAUSING MACROS
Follow these steps to pause macro number 1:
1. Go to Main Menu 2.
2. Select
MAC
.
3. Select or to scroll to macro number 1.
4. Select to pause the macro.
5. Select again to restart the macro.