Filter
Top Products
C1519M-D (3/06) 21
Figure 20. GPI Menu 1
GPI
1 1
MTRY
1 2 3 4
GPI
00912
GPI
MTRY
1
2
3
4
Figure 21. GPI Menu 2
GPI
1 1
5 6 7 8
00913
5
6
7
8
Table J. GPI Menu 1
GPI MENU 1
Select to set the current GPI to the input value. Select to re-
quest control of the selected GPI and send a message to gather
information about the status of the auxiliaries within the GPI.
You have control if this icon is highlighted.
If this icon is highlighted, the auxiliary control method is momen-
tary. If it is not highlighted, the auxiliary control method is latching.
In momentary mode, selecting the icon sends an AUX ON com-
mand and releasing the key sends an AUX OFF command. The
latching mode disables the AUX OFF command from being sent
when the key is released. In latching mode, you can specify a
number up to 6553 and then press the auxiliary number to set the
auxiliary and have it unlatch at the specified time (1-6553 in sec-
onds). If you do not enter a number, the auxiliary latches until an
AUX OFF command is sent. You can issue an AUX OFF com-
mand by placing the keyboard in MTRY (momentary) mode again
and pressing the key (when the key is released an AUX OFF is
sent and the AUX ON when pressing the key is ignored).
Select to send a set auxiliary command for the auxiliary within
the selected GPI. Pressing the key sends an AUX ON and
releasing it sends an AUX OFF in momentary mode.
Select to send a set auxiliary command for the auxiliary within
the selected GPI. Pressing the key sends an AUX ON and
releasing it sends an AUX OFF in momentary mode.
Select to send a set auxiliary command for the auxiliary within
the selected GPI. Pressing the key sends an AUX ON and
releasing it sends an AUX OFF in momentary mode.
Select to send a set auxiliary command for the auxiliary within
the selected GPI. Pressing the key sends an AUX ON and
releasing it sends an AUX OFF in momentary mode.
Select to bring up GPI Menu 2.
Select to return to Main Menu 1.
Table K. GPI Menu 2
GPI MENU 2
Select to send a set auxiliary command for the auxiliary within
the selected GPI. Pressing the key sends an AUX ON and
releasing it sends an AUX OFF in momentary mode
Select to send a set auxiliary command for the auxiliary within
the selected GPI. Pressing the key sends an AUX ON and
releasing it sends an AUX OFF in momentary mode.
Select to send a set auxiliary command for the auxiliary within
the selected GPI. Pressing the key sends an AUX ON and
releasing it sends an AUX OFF in momentary mode.
Select to send a set auxiliary command for the auxiliary within
the selected GPI. Pressing the key sends an AUX ON and
releasing it sends an AUX OFF in momentary mode.
Select to return to GPI Menu 1.
Select to return to Main Menu 1.