Filter
Top Products
Figure 15. Installing the Hard Drive Carrier
20 C3683M (3/09)
4. Install each hard drive carrier as follows:
a. Open the hard drive latch (press down and pull the spring latch).
b. With the hard drive latch open, slide the hard drive carrier gently into an open hard drive bay (refer to Figure 15).
c. Close the hard drive latch; make sure the hard drive carrier locks into place.
5. After all 12 hard drive carriers are inserted, close and lock the front bezel.
NOTE: During operation, monitor the unit status indicator lights to make
sure that all drives are operating properly. If failure occurs, system
alarms and error messages will also display on Endura workstations and VCD5000 video console displays.