Filter
Top Products
Instaling and Configuring TCP/IP
If you have not previously used Internet or installed a computer network on
your PC, refer to the following section.
Installing TCP/IP
Windows 98SE/Me/2000 and XP
Click Start/Help, and seach for the text "TCP/IP". Select the subject on
"Installing Network Protocols" and follow the instructions the Windows
Help function gives you.
Set the TCP/IP protocol you are installing to DHCP for dynamically
allocating IP-addresses within the network. Use the Windows Help function
if you need more information.
Re-run the Setup program from the Installation CD after installing the
TCP/IP-protocol.
Configuring a Macintosh Computer
DHCP IP Configuration
1. Pull down the Apple Menu. Click Control Panel and select TCP/IP.
2. In the TCP/IP dialog box, make sure that Ethernet is selected in the
Connect via: field.
3. Select Using DHCP Server in the Configure field.
4. Close the TCP/IP dialog box.
ENGLISH 13