Filter
Top Products
Your Wireless Base Station 11g
1 Antennas
For connecting to your Wireless Network Adapters
(also called WLAN or WiFi).
2 Reset button
• Press it for 2 seconds to reboot the wireless base station 11g.
• Keep it pressed for more than 5 seconds to restore the factory
default settings.
3 Ethernet ports
RJ-45 sockets for Broadband Modem and Ethernet network cables.
4Power
Socket for connecting the power adapter to the Wireless Base Station 11g.
5 Indicator LEDs
Display the network status.
LED LED colour Meaning
Power Blue Off when power is disconnected
On when receiving power.
Blinking when rebooting
Wireless Off when wireless is disabled.
(Wireless Blue On when wireless enabled and client active.
home network) Blinking when transmitting.
Modem Blue Off when not connected
(Internet modem) On when a link is established.
Blinking when transmitting.
1/2/3/4 LAN Yellow (10 Mbps) Off when not connected
(Wired home network) Blue (100 Mbps) On when a link is established.
Blinking when transmitting.
6 Label with MAC address
The MAC address consists of 12 characters (e.g. 00:30:F1:A1:F4:A5 or, in
general, xx:xx:xx:xx:xx:xx) and is the unique hardware address of this
network device. Some safety features or network identification purposes
need this MAC address.
➊
➋
➍
➌
➊
➎
➌
ENGLISH 7