Filter
Top Products
Wireless
To configure the Wireless Base Station 11g as a wireless access point for
wireless clients (either stationary or roaming), all you need to do is define
the radio channel, the Network Name (or Service Set identifier/SSID)
(Default: philips), and encryption options.
Channel and SSID
You must specify a common radio channel and Network Name (SSID) to
be used by the Wireless Base Station 11g and all of your wireless clients.
Be sure you configure all of your clients to the same values. Network name
(SSID).This should be set to the same value as other wireless devices in
your network. (Default: philips.)
Note: The Network Name (SSID) is case sensitive and can consist of up to
32 alphanumeric characters.
Transmission Rate: Set the data rate transmitted from the Wireless Base
Station 11g.The lower the data rate, the longer the transmission distance.
(Default: Fully Automatic.)
Basic Rate: The highest rate specified is the rate the Wireless Base
Station 11g will use when transmitting broadcast/multicast and management
frames. (Default:All.)
Channel: The radio channel through which the Wireless Base Station 11g
communicates with PCs in its service range. (Default:Auto).
Note: The available channel settings are limited by local regulations.
Broadcast Network Name: Broadcasting the SSID on the wireless network
for easy connection with client PCs.
(Default: Enable)
26 ENGLISH