Filter
Top Products
Remote Management
Remote Management allows a remote PC to configure, manage, and
monitor the Wireless Base Station 11g using a standard web browser.
Check Enable and enter the IP address of the remote host. Click APPLY.
Note: If you specify 0.0.0.0 as this IP address, any host can manage the Wireless
Base Station 11g.
Internet Settings
Specify the Internet connection type provided by your Internet Service
Provider, then click More Configuration to enter detailed configuration
parameters for the selected connection type.
Dynamic IP
The Host Name is optional, but may be required by some ISPs.The default
MAC address is set to the Internet’s physical interface on the Wireless Base
Station 11g. Use this address when registering for Internet service, and do
not change it unless required by your ISP. If your ISP used the MAC address
of an Ethernet card as an identifier when first setting up your broadband
account, only connect the PC with the registered MAC address to the
Wireless Base Station 11g and click the Clone MAC Address button.
This will replace the current Wireless Base Station MAC address with the
already registered Ethernet card MAC address. If you are unsure of which
PC was originally set up by the broadband technician, call your ISP and
request that they register a new MAC address for your account.
Register the default MAC address of the Wireless Base Station 11g.
ENGLISH22