Open as PDF
Use Cursor Control left
and/or right to move the
cursor to any other item
in the menu bar.
Select the sub menu
item to be adjusted using
Cursor Control up and/or
Adjust the selected item
in the action window at
the bottom of the screen,
using Cursor Control left
Select the next item to
be adjusted in the sub
menu and adjust as
Press MENU to close the
On Screen Display.
The projector can display menus in one of six different
– The menu bar appears on the screen.
Use Cursor Control to select SETTINGS in the menu bar.
Use Cursor Control to select LANGUAGE from the sub
Use Cursor Control to select the required language in the
Press OK (–/––) to confirm and store the selected language.
If required, select the next item to be adjusted or press
MENU to exit.
Display and picture control
The projector’s picture is set to standard specifications at the
factory. However, you can adjust the image to suit your own
The projector will store the last used settings for every source.
So when you switch from one source to another, the settings of
the source switched from will be stored and the settings of the
source switched to will be recalled.
When the projector is switched off and on again the settings for
the selected source will be recalled again.
For data signal input, the following adjustments can be made:
– Auto image
automatically sizes and positions the image to fit optimally in
the screen picture;
– Horizontal size
adjusts the computer image in a horizontal direction to make
the image completely fill the screen;
adjusts the computer image in horizontal and vertical
direction to centre it on the screen;
when connecting the projector to your PC for the first time,
be sure to adjust the phase control for optimal readability of
the projected text;
Data and Video/S-Video
For both data and video/s-video signal input, the following
adjustments can be made:
– Digital Freeze
captures a moving picture (still picture);
– Digital Zoom
enlarges a part of the picture;
selects another section of enlarged picture (in combination
with digital zoom);
– Keystone Correction
corrects picture distortion of the vertical keystone type by
adjusts brightness of the dispalyed picture;
adjusts the overall contrast intensity;
controls the contour impression of the picture;
– Colour Temperature
adjusts the overall picture impression from warm to cool;
– Picture Format
selects one of three picture format options (4:3, 16:9 or 16:9
mirrors the picture for use of the projector in various
positions with respect to the user(s) and the projection
screen (for further explanation see ‘Display and picture
control’ - ‘Mirror’).
For Video/S-Video signal input, the following adjustments can be
(only for NTSC)
adjusts the tint of the projected image;
adjusts the colour saturation of the projected image.
Tip for Windows users:
To adjust size and phase correctly:
Select ‘Start’ and then ‘Shut down’.
Adjust the projectors size control, so that no vertical bars
Now adjust the projectors phase control for maximum
brightness of the projected image.
Press ‘No’ in the Windows shutdown screen to cancel the
Preparation/Display and picture control
Move pointer left or right to adjust the contrast level.
Picture Audio Settings