Filter
Top Products
4
English
4 Press PC LINK A on the additional audio system for at least 5 seconds until INSTALLING is
scrolled on the set.
➜ The set searches for a connection to the PC.This can require up to about a minute.When
the connection is established, Next is activated.
Note: If the additional audio system is not an MC W770, please look at the user manual of the
device on how to enter the installation mode.
Click on Next.
5 ➜ The installation steps
will be executed
automatically by the
PC.Afterwards PC
LINK and
COMPLETED are
displayed on the set
and the following
window will appear:
Click on Exit and the
installation is finished.
Installation of an additional PC server or recovery of PC link settings on your PC
If you want to use your MC W770(s) together with more than one PC, you have to install the
Philips Media Manager Software and the PC link setting on your PC.A wireless USB adapter is
required. If you want to use a different network adapter as bypacked with the MC W770
proceed according to chapter “Using a different wireless network adapter” (Please note that a
proper function cannot be guaranteed by using a different network adapter).This procedure
can also be used when your PC link settings on your PC are lost or destroyed.
If you use the bypacked wireless USB adapter proceed as follows:
1 Enter the Custom installation menu on PC side, select Add New PC server and click on
Install.
➜ You will be asked if you want to install the driver for the wireless USB adapter.
2 If the driver is not installed and you want to use it: Click on Ye s.
➜ The drivers will be installed and the PC has to be rebooted.
If the wireless USB adapter is already installed:Click on No.
Custom Installation Wireless PC link
MC W770/eng 8/23/01 15:34 Page 4