Filter
Top Products
Installation Instructions 3 - 1
3 INSTALLATION INSTRUCTIONS
3.1 INTRODUCTION
This section contains instructions for the followin
g
:
• inspectin
g
the contents of the shipment for completeness and/or dama
g
e
durin
g
transport (initial inspection)
• ensurin
g
the safety of the operator
• installin
g
the power supply
•makin
g
the input and output connections
• performin
g
the installation acceptance checks
3.2 INITIAL INSPECTION
Inspect the contents of the shipment for completeness and note whether any
dama
g
e has occurred durin
g
transport. If the contents are not complete, or if there
is dama
g
e, inform your FLUKE Sales and Service Center so that repair or
replacement of the instrument can be arran
g
ed.
Pay special attention to the followin
g
parts :
• accessories to be supplied (refer to Appendix A).
• front panel keys and display.
• rear panel connectors and terminal blocks.
• cabinet surfaces.
The shipment must contain one power supply plus the accessories supplied. For
a complete list of accessories supplied, refer to the INITIAL INSPECTION pa
g
e
in the front of this manual.
3.3 OPERATOR SAFETY INSTRUCTIONS
The instrument has been desi
g
ned and tested in accordance with IEC Publication
1010 for Class 1 instruments and has been supplied in a safe condition. This
Operation Manual contains WARNING and CAUTION statements, that must be
followed by the user to ensure safe operation and to keep the instrument in a safe
condition.