Open as PDF
5 - 12 Users Manual
When the sense leads are disconnected, the power supply
oes into the local sense
mode, as the V and S terminals are internally interconnected via resistors. Yet you are
ly recommended to interconnect the V and S terminals with the straps if you
use the local sense mode, as open sense inputs are sensitive to noise. Moreover, the
output specifications are not
uaranteed when the sense terminals are open.
Output modules with low volta
s may have less sense capability for output
es in the upper part of the volta
. the 8V/15A module for the
e from 4V to 8V (see the Reference Manual, Appendix A).
For power supplies with a Front Connection Unit, the sense capability is reduced
with about 5mV/A per load lead.