Filter
Top Products
Upgrading The Computer
6 - 4 Upgrading the Hard Disk Drive
6
Upgrading the Hard Disk Drive
The hard disk drive can be taken out to accommodate other 2.5" parallel (PA-
TA) hard disk drives with a height of 9.5mm (h) (see “Storage” on page A -
3). Follow your operating system’s installation instructions, and install all
necessary drivers and utilities (as outlined in “Installation Procedure” on
page 4 - 6), when setting up a new hard disk.
1. Turn off the computer, and turn it over and remove the battery.
2. Locate the hard disk bay cover and remove screws
- .
3. Remove the bay cover .
HDD System
Warning
New HDD’s are blank.
Before you begin make
sure:
You have backed up any
data you want to keep
from your old HDD.
You have all the CD-
ROMs and FDDs re-
quired to install your oper-
ating system and
programs.
If you have access to the
internet, download the lat-
est application and hard-
ware driver updates for
the operating system you
plan to install. Copy these
to a removable medium.
Figure 6 - 2
Hard Disk Cover
Removal
1 7
8
2
1
3
4
5
6
7
8