Pioneer PDA-5002 Computer Hardware User Manual


 
15
En
Setting Up the System
English
Setting Up the System
CLAMP POSITION setup
Depending on the signal, analog RGB signals may result
in the screen image appearing with a whitish or greenish
cast. In such cases, set CLAMP POSITION to LOCKED.
Normally, leave this setting at AUTO.
Setup of CLAMP POSITION
1 Press MENU to display the menu screen.
The menu screen appears.
MAIN MENU INPUT1
SELECT ENTER EXIT
SET
MENU
PICTURE SCREEN SET UP OPTION
:
0
:
6
+
+
+
0
:
60
:
60
:
0
:
0
CONTRAST
:
0
BR
RLEVEL
IGHT.
.
GLEVEL.
BLEVEL.
H ENHANCE.
V ENHANCE.
RSETE
2 Press 2/3 to select SET UP.
SELECT ENTER EXIT
SET
MENU
PICTURE SCREEN SET UP OPTION
:
V
GA
:
N
T
:
A
UTO
SETTIN
CLAMP
POWER
:
G
O
FF
PSITIONO
MNAGEMEA
INPUT INPUT
1
LEBLA
MAIN MENU INPUT1
3 Press 5/ to select CLAMP POSITION.
SELECT CHANGE EXIT
SET
MENU
PICTURE SCREEN SET UP OPTION
:
N
T
SETTIN
CLAMP
POWER
:
G
O
FF
PSITIONO
MNAGEMEA
INPUT INPUT
1
LEBLA
:
V
GA
:
A
UTO
MAIN MENU INPUT1
4 Press SET to select LOCKED.
SELECT CHANGE EXIT
SET
MENU
PICTURE SCREEN SET UP OPTION
:
N
T
SETTIN
CLAMP
POWER
:
G
O
FF
PSITIONO
MNAGEMEA
INPUT INPUT
1
LEBLA
:
V
GA
:
L
OCKED
MAIN MENU INPUT1
Mode selection will change as follows each time SET
is pressed.
5 When the setup is completed, press MENU to exit
the menu screen.
Notes
÷ Make this CLAMP POSITION setting for each applicable input
(INPUT1 and INPUT2).
÷ When using this setup, be sure to carefully check the signal
output of the component that you are using. For details, please
refer to the instruction manual supplied with the component
you are connecting.
3 AUTO
LOCKED 2
The table below shows what settings are appropriate
and available for the type of connections made.
Set SETTING and VIDEO SIGNAL as follows.
10 When the setup is completed, press MENU to exit
the menu screen.
Notes
÷ Make this setup for each input (INPUT1 and INPUT2).
÷ The VIDEO SIGNAL setting is not supported when inputting a
computer signal, or when the SETTINGS function has been
used to select a signal other than VIDEO.
Component video output
of a DVD player, etc.
RGB video output of a
video deck etc., with RGB
output
RGB video output of a PC
Connected
component
SIGNAL
SETTING
SET UP
VIDEO
VIDEO
VGA
WIDE VGA
XGA
WIDE XGA
COMPONENT
RGB
Not supported